Beli pin taper indonesia di monotaro.id
/9bP102208335-4.jpg)
%20Steel%20Pin%20Gauge/fvP101502571-2.jpg)
/Kennedy%20Taper%20Bore%20Gauge/14P102203040-2.jpg)
%20Individual%20Steel%20Pin%20Gauge%20AA/foP101502564-5.jpg)
%20Individual%20Steel%20Pin%20Gauge%20AA-4B/i1P101502649-3.jpg)
%20Individual%20Steel%20Pin%20Gauge%20AA-2B/gpP101502601-3.jpg)
Kami Menampilkan Rekomendasi Kami Untuk Anda! Anda Bisa Membelinya Kapan Saja di monotaro.id
Sherwood Hand Taper Pin ReamerDeskripsi:Metric. Used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. Manufactured to BS 328 : Part 4 : 1990 and DIN 9A. METRIC TOLERANCES: Diameter: Over 1.50 ~ up to 5.00. Tolerance: +0.075, -0.000. Diameter: Over 5.00 ~ up to 20.00. Tolerance: +0.125, -0.000.- Kennedy Long Taper Punch Set (4-Pce)Deskripsi:Manufactured from chrome vanadium steel. Used for aligning holes in jigs and fixtures etc. Taper Punch Set Contents: 1x 3, 4, 5, and 6mm.atribut:
- Overall Length: 210mm 215mm 225mm 240mm
- Head Shape: Round
- Type: Taper Punch
- Tip Material: Chrome Vanadium Steel
- Compatible Cutting Material: Aluminium Brass Mild Steel Paper Plastic Stainless Steel Steel Wood
- Part Number: KEN5181550K
- Niigata Seiki (SK) Steel Pin GaugeDeskripsi:- A pin gauge is a pin-shaped (cylindrical) gauge with precisely finished diameter dimensions.- This is the most common pin gauge.- All products have undergone sub-zero treatment to prevent aging.- Since it is a perfect circle, it can be used in any situation.Purpose:- For inspecting hole diameter.- As parts for molds.- For core wobbling inspection.- For R measurement.atribut:
- Length (mm): 50
-
-
-
- Shinwa Rules Taper Gaugeatribut:
- Material: Stainless
- Kennedy Taper Bore GaugeDeskripsi:These are called taper gauges only because of their shape - they do not measure tapers. They are ideally suited for the rapid accurate checking of the inside diameters of tubing, slot widths, hole sizes, setting calipers etc. Manufactured from spring tempered steel. 0.1mm increments. Rustless. Constant at 20 Degree C. Satin chrome anti glare finish. Permanent black figures and graduations.atribut:
- Material: Steel
- ENGINEER Taper Reameratribut:
- Material: High carbon steel
- Penetration Range: 6.0-30φ mm
- Overall Length: 145mm
- Blade length: 107mm
- TRUSCO Taper Gaugeatribut:
- Finishing Material: S55C
- Instrumental Error (mm): +/-0.04
- Length (mm): 160
- Purpose of Use: For measurements of grooves/Crevice etc.
- Niigata Seiki (SK) Individual Steel Pin Gauge AAatribut:
- Tolerance (µm): ± 0,8
- Cylindricity (µm): 0,5
- Hardness: HV 720 or more
- Niigata Seiki (SK) Individual Steel Pin Gauge AA-4Batribut:
- Hardness: HV 650 or more
- Cylindricity (µm): 0,5
- Length (mm): 50
- Tolerance (µm): ± 0,8
- TRUSCO Pin PunchDeskripsi:Use:Perfect for removing taper pins and spring pins, etc.atribut:
- Length (mm): 150
- Material: Nickel-Chromium-Molybdenum Steel
- Niigata Seiki (SK) Individual Steel Pin Gauge AA-2Batribut:
- Cylindricity (µm): 0,5
- Length (mm): 50
- Tolerance (µm): ± 0,8
- TRUSCO Parallel PinDeskripsi:28atribut:
- Material: S45C (Raw)
- Purpose of Use: Inserting into a hole, used for fitting, positioning, and anti-rotation, etc.
- monotaro Steel Pin GaugeDeskripsi:- It is a general steel pin gauge.- Hole diameter, parallel to the hole, width of the groove, center of the hole, position measurement etc.atribut:
- Gauge Length (mm): 50
- Hardness HRC: 58 or more
- Precision (µm): ± 0.02
- Roundness/Cylindricity (µm): 1.5
- SOMTA Morse Taper Shank Drillatribut:
- Material: High speed steel
- Type: N Standard
- Coating: Blue finish [Steam (HOMO) Temper]
- TRUSCO Pin Hexagonal Socket Set ScrewDeskripsi:-Since the shape has a vertical pin at the center of the hexagon socket, cannot be removed by common tool.atribut:
- Tensile Strength Rank: 45H
- Material: Alloy Steel, Surface Treatment:Black Dye
- Okazaki Seiko Tapered Pin ReamerDeskripsi:MCO material is used.atribut:
- Material: MCO (cobalt high speed steel)
- Taper: 1/50
- Kennedy Long Taper PunchDeskripsi:Manufactured from chrome vanadium steel. Used for aligning holes in jigs and fixtures etc.atribut:
- Head Shape: Round
- Compatible Cutting Material: Aluminium Brass Mild Steel Paper Plastic Stainless Steel Wood
Daftar Harga pin taper indonesia Terbaru December 2025
| Sherwood Hand Taper Pin Reamer | Rp769.900 |
| Kennedy Long Taper Punch Set (4-Pce) | Rp759.900 |
| Niigata Seiki (SK) Steel Pin Gauge | Rp44.000 |
| EIKO Taper Pin Reamers | Rp1.099.900 |
| NACHI Taper Pin Reamers | Rp739.900 |
| Daytona Piston Pin 38mm/Taper Type | Rp88.900 |
| Shinwa Rules Taper Gauge | Rp159.900 |
| Kennedy Taper Bore Gauge | Rp459.900 |
| ENGINEER Taper Reamer | Rp159.900 |
| TRUSCO Taper Gauge | Rp489.900 |
Data diperbarui pada 31/12/2025 (Harga belum termasuk PPN)
Buka WhatsApp